Skip to main content
NRF24L01 wireless Module with Antenna, Power and Low Noise Amp, 250kbps to 2Mbps

NRF24L01 wireless Module with Antenna, Power and Low Noise Amp, 250kbps to 2Mbps

Gringo Gadgets

$2.88     Volume Pricing Available

Volume Pricing

Below are the available quantity breaks when you purchase a certain amount

  • Buy 10 - 49 and pay only $2.63
  • Buy 50 - 99 and pay only $2.38
  • Buy 100 or above and pay only $2.19
   
(No reviews yet) Write a Review
SKU: GG-DIY-NR1
UPC: 811681034471
Condition:
New

NRF24L01 Module with Antenna



The NRF24L01+PA+LNA is a long-range 2.4GHz wireless transceiver module that extends communication distances up to 1100 meters line-of-sight, depending on the selected data rate and environmental conditions

  • Frequency Band: 2.4 GHz ISM band
  • Range: Up to 1,100 meters with an external SMA antenna
  • PA & LNA: Includes a Power Amplifier (PA) for stronger transmission and a Low-Noise Amplifier (LNA) for better signal reception.
  • Data Rates: Configurable at 250 kbps, 1 Mbps, or 2 Mbps
  • Interface: Communicates via a 4-pin SPI connection.



Note:While the module requires little current during receive-mode, it draws up to 220mA of current at 3.3V during transmission, which is more than most development boards (like Arduino Uno) can provide. Provide a separate 3.3V power supply to this module, and place an electrolytic capacitor (10 to 100 uF) close to the module's power pins for optimum performance.
Data Rate: 250kbps,1Mbps,2Mbps
Frequency: 2.4 GHz
Includes: Antenna
Range: 1100 meter (Max)
Voltage: 3.3 V
Alt. Part Numbers: NRF24L01+PA+LNA
!