16-Channel 74HC4067 Breakout Board
The 16-channel analog multiplexer breakout board allows for the connection of 16 analog signals to a single analog input pin on an A-to-D converter / microcontroller. It acts as a 16-to-1 analog switch: using the 4 channel-select pins (S0 through S3), you select which of the 16 input signals (pins C0 through C15) is connected to the output (Sig pin).
The module can also be used as a multiplexer for digitial signals, so you can connect 16 on/off signals to a single input on the microcontroller / logic.
There is also an enable pin which can be used to turn the module on/off.
The module requires 2 to 6V DC operating voltage. The switched analog signals must not exceed the supply voltage.
Please refer to the 74HC4067 datasheet for details on power and switching characteristics
- Channels: 16
- Power: 5 V
- Resistance: Typ: 60 Ohms
Downloads:
• Datasheet
